Sponsored Links
-->

Monday, February 5, 2018

Architectural Model of Fremont Bridge in Portland Oregon
src: img1.etsystatic.com

The Fremont Bridge is a steel tied-arch bridge over the Willamette River located in Portland, Oregon, United States. It carries Interstate 405 and US 30 traffic between downtown and North Portland where it intersects with I-5. It has the longest main span of any bridge in Oregon and is the second longest tied-arch bridge in the world (after Caiyuanba Bridge across the Yangtze River, China). The bridge was designed by Parsons, Brinckerhoff, Quade and Douglas, and built by Murphy Pacific Corporation.

The bridge has two decks carrying vehicular traffic, each with four lanes. The upper deck is signed westbound on US 30 and southbound on I-405. The lower deck is signed eastbound on US 30 and northbound on I-405.


Video Fremont Bridge (Portland, Oregon)



Design and construction

Due to the public's dissatisfaction with the appearance of the Marquam Bridge, the Portland Art Commission was invited to participate in the design process of the Fremont. The improvement in visual quality resulted in a bridge that was nearly six times as expensive as the purposely-economical Marquam Bridge. Designers modeled the bridge after the original 1964 Port Mann Bridge in Vancouver, British Columbia.

The steel tie-girder (I-beam) is 18-feet tall and 50-in wide. On October 28, 1971, while still under construction, a six-foot-long crack was found on the west span of this girder that required a $5.5 million redesign and repair. The ramps and approaches are steel box girders. If the lanes of the bridge were placed end-to-end, there are 3.27 lane-miles on the arch bridge and 14.12 lane-miles on the ramps and approaches.

The center span of the bridge, where the rib of the arch is above the deck, is 902 feet long. It was fabricated in California then assembled at Swan Island, 1.7 miles (2.7 km) downstream. After assembly it was floated on a barge the 1.7 mile trip to the construction site. On March 16, 1973, the 6,000-ton steel arch span was lifted 170 ft (52 m) using 32 hydraulic jacks. At the time, it was listed in the Guinness Book of World Records as the heaviest lift ever completed.

The bridge was opened on November 15, 1973, at a final cost of $82 million, most of which was financed by the Federal Highway Administration. In 1976, an American flag and an Oregon flag were added atop the structure as part of the bicentennial celebration for the United States. The flags were installed with the use of a helicopter. The 15-by-25-foot (4.6 m × 7.6 m) flags are attached to 50-foot (15 m) tall flagpoles at the crest of the arches.


Maps Fremont Bridge (Portland, Oregon)



Falcon nest

The Fremont Bridge was also the 26th Peregrine falcon nest site designated in Oregon in 1995 after the raptor was placed on the U.S. Threatened and Endangered Species list in 1970.


Fremont Bridge, Portland, Oregon Stock Image - Image: 1399785
src: thumbs.dreamstime.com


Etymology

The bridge as well as Portland's associated Fremont Street were named for John C. Fremont (1813-1890). Fremont was an early explorer of the Oregon Country. He served in the United States Army at the time as a captain and later promoted to general. In 1856, he ran for president, but was defeated by James Buchanan.


File:Fremont Bridge, Portland, OR 06 March 2012.JPG - Wikimedia ...
src: upload.wikimedia.org


Gallery



Fremont Bridge Portland Oregon and Mount Saint Helens in the Fall ...
src: c8.alamy.com


See also

  • Bridges portal
  • Oregon portal
  • List of crossings of the Willamette River

File:USACE Fremont Bridge Portland.jpg - Wikimedia Commons
src: upload.wikimedia.org


References


Oregon Legislature Approves Plan to Start Charging Tolls on Two ...
src: www.wweek.com


External links

  • Historic American Engineering Record (Library of Congress) Fremont Bridge, Spanning Willamette River, Portland, Multnomah County, OR
  • Fremont Bridge at Structurae

Source of article : Wikipedia